Family house

Idea projektu

The subject of the project is the design of a family house on a sloping terrain, which is located in Šárecké valley in a newly developed golf resort. The content of the bachelor's thesis is to prepare an architectural study and a selected parts of the project at the stage for a building permit. The parcel is located on a north sloped hill with a view of the forest and surrounded nature. The house looks like a sculpture carved from a single piece of marble. Sharp white walls, simple surface treatments, orientation towards the forest and inner atrium help to find silence and shelter from the nearby bustle of the big city of Prague.

Popis projektu

This house makes me feel calm and simple elegance. Its clean lines and minimalist design impress modern and sophisticated. Large glazed areas bring to the interior a lot of natural light, which creates a pleasant and bright atmosphere. The overall impression is very harmonious, thanks to soft colors and simple but thoughtful arrangement. This house also suggests a connection with nature, especially thanks to the inner atrium with plants it brings to interior greenery and a calm atmosphere.

Technické informace

The building has one floor. This partly rises from the slope above the ground. Load-bearing structures They are made of sand-lime blocks. The ceilings are made of reinforced concrete Vertical load-bearing structures – The load-bearing walls are made of VPC blocks with a thickness of 150-200 mm. The perimeter masonry is monolithic reinforced concrete with a thickness of 200 mm. Horizontal load-bearing structures – Ceilings and girders are designed from monolithic reinforced concrete. These are unidirectional tensioned plates. The stiffening of the object will be used by reinforced concrete girders in the perimeter of the building and beams. The beams are hidden, turned into Attic levels. Columns – There are 3 load-bearing steel columns in the building. Dimensions 150 mm x 150 mm Staircase – There is no main or leveling staircase inside the building. Outdoor the staircase serves to connect the atria and the driveway to the garden area. Partitions – Internal partitions are designed from VPC masonry, they will then be provided with stucco and lime-cement plaster. The front walls for guiding the installations are made of gas silicates. Roof – The roof is flat, with an attic around the perimeter. The fall is ensured by fall wedges EPS in the minimum decline of 2%. The minimum thickness of EPS is 200 mm. The main waterproofing layer form foil, mechanically anchored waterproofing. The roof is equipped with a photovoltaic power plant. Part of the roof is designed as green. Floors – Individual floor compositions are listed in the drawing documentation. It's the floor conducted underfloor heating on system floorboards. It is a tread layer ceramic tiles. Opening Fillers – Windows are designed from aluminum frames with elevation adjustment maintenance-free. Facade – 200-thick graphite EPS thermal insulation is anchored to the perimeter masonry mm. The surface of the facade is provided with waterproof plaster. The complete composition is part of the drawing documentation. Internal surfaces – The surface of the internal walls is mostly made of lime-cement plaster white color. Ceramic tiles are used in the bathrooms and toilets. Suspended ceilings – Plasterboard suspended ceilings on aluminum hinges are located in the day zone home. There is an SDK for wet areas in the bathrooms. Night, private part (rooms, corridors, cloakrooms) is equipped with a suspended ceiling made of bioboard (SWP) suspended on curtains. Technical the rooms are without suspended ceilings and have an approved ceiling made of visual quality concrete. Plumbing – Plumbing features vary by location. Their description is part of the drawing documentation. Mechanical resistance and stability – The construction is designed to last a lifetime resisted the load acting on it.